ETC Response
ETC Response Gateways can be configured by following the instructions here
The ETC Response Connection links to both the ETC Response Show Control and ETC Response Timecode Widgets allowing for Timecode or MIDI Show Control data to be displayed.
Status
The detected status of the connection. The two options are:
Connected (Green)
Disconnected (Red)
Name
The name of the connection
Interface
The network interface used to connect to the Response Gateway
Multicast
If outputting to a Multicast address, input the multicast address here. This needs to match the setting configured in the gateway.
Port
The port to listen on for incoming Response Gateway information. This needs to match the setting configured in the gateway.
Model
The style of Response Gateway. Options are:
SMPTEMIDI
Terminator
The terminator for the message. This needs to match the setting configured in the gateway. Options include:
NoneCarriage Return (CR)Line Feed (LF)Carriage Return + Line Feed (CR+LF)
ETC Response MIDI Specific Options
Device ID
The MSC device ID number of the transmitting device to listen to. Defaults to All (no filter)
Command Format
The MIDI Command Format to listen to. Defaults to All (no filter)
Command
The MIDI Command to listen to. Defaults to All (no filter)
Screenshot
Last updated
